Garage Door Jerks When Closing

    Neesd a professional technician?

    For garage door services in Pittsburgh and its surroundings, Call us:

    (412) 388-2633

    Or, send a message

    Garage Door Jerks When Closing

    Want To Know How To Fix a Jerking Garage Door?

    The Mysterious Case of the Garage Door Jerks

    Do you have a garage door that jerks when it closes? If so, you’re not alone. Many homeowners experience this issue, and it can be very frustrating. In this blog post, we will discuss the causes of garage door jerks and offer some solutions. We will also provide information on how to maintain your garage door and keep it in good working condition.

    Common causes

    One of the most common causes of garage door jerks is an improperly balanced door. If your garage door is not properly balanced, it will jerk when it reaches the end of its track. This can be caused by a variety of factors, including loose hardware, worn out parts, or an uneven floor. If you suspect that your garage door is not balanced, you should have a professional garage door technician take a look at it.

    Another common cause of garage door jerks is an obstruction in the track. This can be caused by debris, leaves, or even small animals. If you notice that your garage door is jerking when it closes, you should check the track for any obstructions. If you find an obstruction, you should remove it and see if that solves the problem.

    Garage door still jerking?

    If your garage door is still jerking after you’ve checked for balance and obstructions, it’s possible that there is a problem with the springs. Over time, garage door springs can become worn out or damaged, which can cause them to break. If your garage door springs are broken, you will need to have them replaced by a professional.

    No matter what the cause of your garage door jerks, it’s important to have it fixed as soon as possible. A garage door that is not functioning properly can be dangerous, so it’s best to call a professional for help. Garage door repair and maintenance is not a do-it-yourself job, so don’t hesitate to call a professional if you’re having trouble. With the right help, your garage door will be back to working like new in no time!

    Why does my garage door rail bow?

    One of the most common questions we get from customers is, “Why does my garage door rail bow?” While this may seem like a strange question, it’s actually a very common issue. If you have noticed that your garage door rail is bowed, it’s likely because the rollers are not properly aligned. This can be caused by a variety of factors, including loose hardware, worn out parts, or an uneven floor. If you suspect that your garage door rail is not aligned, you should have a professional garage door technician take a look at it.

    How can I prevent my garage door from jerking?

    One of the best ways to prevent your garage door from jerking is to have it serviced on a regular basis. Garage door maintenance is important, and it can help keep your door in good working condition. During a service appointment, a garage door technician will inspect your door and make any necessary repairs or adjustments. They will also lubricate the parts of your door to help prevent problems in the future.

    Why is my garage door so loud when closing?

    If your garage door is loud when it closes, there are a few possible causes. One possibility is that the springs are worn out or damaged. Another possibility is that the rollers are not properly aligned. If you notice that your garage door is loud when it closes, you should have a professional garage door technician take a look at it to determine the cause. With the right help, your garage door will be back to working like new in no time!

    Why does my garage door shake when closing?

    One of the most common reasons for a garage door to shake when closing is an imbalance. If your garage door is not properly balanced, it will shake when it reaches the end of its track. This can be caused by a variety of factors, including loose hardware, worn out parts, or an uneven floor. If you suspect that your garage door is not balanced, you should have a professional garage door technician take a look at it.

    How much does it cost to repair a garage door that jerks in Pittsburgh?

    The cost of repairing a garage door that jerks in Pittsburgh can vary depending on the cause of the problem. If the issue is due to an imbalance, it may be possible to fix it without replacing any parts. However, if the problem is caused by damaged or worn out springs, you will likely need to have them replaced by a professional. The cost of replacing garage door springs can range from $200 to $500, depending on the type of spring and the size of your door. If you are having trouble with your garage door, it’s best to call a professional for help.

    With the right help, your garage door will be back to working like new in no time!

    Read more…

    Does your garage door often gets jammed or jerks and shakes a lot when you try to close it?

    When your overhead garage doors jerks or shakes a lot when you attempt to close it, it is mostly because of misaligned or damaged garage door tracks.

    The track is a part of your garage door’s mechanical system that ensures the path it takes when lifting it open or close.

    Basically, they are responsible for setting the way in which your garage door opens or closes.

    Depending on the type of door you have, your tracks can be located either on the sides, the top, or the bottom of your garage doors.

    Garage door tracks can be considered as one of the minor parts of your garage door, but this is maybe something you shouldn’t take for granted.

    A lot of things can go wrong when a problem like this is left unattended or ignored.

    But what exactly can you do when your garage door jerks when closing?

    What makes your garage doors jerk?

    Before you get to fix your ‘garage door jerks when closing’ problem, you have got to know and understand why it happens.

    Doing this will allow you to know how to respond accordingly if ever you do find yourself in a situation like this again.

    Basically, a garage door functions because of three major elements – your garage door, your garage door opener, and your garage door spring.

    Without any one of these can make it potentially difficult to have a functioning overhead garage door.

    The garage door is the thing that opens and closes, the garage door opener is what lifts them open and close, and the spring supports the door’s weight making it easier to open manually or through our garage door openers.

    These three parts working together is basically what gives your garage door the ability to open and close.

    Now, in order to lift your garage doors open and close smoothly and without any hitch, you will need your door’s rollers and tracks to help you do so.

    However, if you have any debris on your tracks, have misaligned tracks, or any damages on them such as dents, then it could cause your garage door to jerk whenever you lift it open and close.

    Worst, you might even have it jammed somewhere along the way.

    Aside from your door’s tracks, other possible, although uncommon, reasons as to why the jerking problem happens with your garage doors could be also due to your opener’s chain, belt, or motor.

    What to do when the garage door jerks when closing?

    Now that you understand the concept behind the problem at hand, it is now time to answer the question regarding what you can do when you find yourself in a problem such as this.

    So what exactly can you do in a situation like this?

    When your garage door jerks when closing, the first thing you should do is check your garage door’s tracks and roller.

    Look for any misaligned tracks or dented tracks and any damaged rollers that could possibly be the reason behind all the jerking.

    For dented garage door tracks, try to assess the damage on them further.

    If the damage is minor, then try to straighten it out by hammering the dented area with a wooden or rubber mallet until it straightens out completely, however, if the dent is bigger or cannot be dealt with simply hammering it, then consult your garage door repair technician regarding the best course of action you should take.

    If the damage is irreparable, then have your garage door’s tracks or rollers replaced.

    Also, you should consider checking your garage door’s screws, nuts, bolts, hinges, wall mounts etc.

    It can also be possible that the jerking of your garage door is brought upon loosened parts or components of your garage door.

    If this is indeed the case for you, make sure you have it resolved right away before things start to get even worse.

    Conclusion

    When your overhead garage doors start acting off or weirdly, then it is probably an indicator that something may be wrong with it, which in this case could be your garage door’s tracks.

    Assessing the problem can be easy but the tricky part comes with what you should do in order to address it properly.

    After all, recklessly rushing in with your head first can only make matters worse for your overhead garage doors.

    If the problem seems easy to handle, then you can go ahead and tinker with it.

    Replacing, adjusting, and repairing garage door tracks can easily be accomplished after all as long as you have the proper tools and equipment for the job.

    However, if you have no idea exactly what you should do in order to fix your garage door, then do stop tinkering with your door and ask for professional help.

    If you are in Pittsburgh and are looking for a garage door repair company that offers a lot of different garage door services perfectly suited for your garage door, then try checking out Marksman Garage Doors.

    Call Us!

    We have the best services and technicians around that can surely deal with all sorts of problems that you might be encountering with your garage door.

    Plus, we are also available to serve you 24/7 so no matter the time of day, we will always be there for you to the rescue.

    Get to know more about our different rates and services by giving us a call or visiting us at our main office in Pittsburgh.

    Get the best quality services for your garage doors, choose Marksman Garage Doors now!

    5/5 - (1 vote)

    Recommended articles

    Tags
    a1 garage door repair service pittsburgh pa, chamberlain garage door opens by itself, clopay garage doors, emergency door services, garage door adjustment do it yourself, garage door bottom roller popped out, garage door cable came off spool, garage door cable repair cost, garage door cable repair kit, garage door cable rubbing on door, garage door cables loose when door is open, garage door installation, garage door installation pittsburgh, garage door lift cables, garage door off track cable, garage door opens sporadically, garage door phantom opening, garage door repair, garage door repair 15237, garage door repair near me, garage door repair pittsburgh, garage door repair south hills pittsburgh, garage door shifted to one side when opening, garage door spring tension chart, garage door tension cable broke, garage door track repair, giel garage doors, henefeld garage doors, how to adjust a garage door that is crooked, how to adjust garage door cables, how to adjust garage door springs and cables, how to adjust garage door to close tighter, how to close garage door with broken cable, how to fix garage door, how to fix up and over garage door cable, how to install garage door springs and cables, how to measure garage door cables, how to put garage door back on track after power outage, how to replace garage door rollers without bending track, how to stop garage door from opening, mcmurray garage doors, merlin garage door opening by itself, pittsburgh garage door sales, steel city garage doors, why garage door opened for no reason
    Contact Us